Please choose your delivery location

The selection of the country/region page can influence various factors such as price, shipping options and product availability.
My contact person
Select location
NZ(EN)

triflex® RSE – linear retraction system for TRC, TRE, TRCF

Retraction system for welding, riveting and assembly robots.

As robotic technology become more complex, the demands on the energy management systems are increasing. More and more often, not only electrical and pneumatic cables but also feed hoses for bolts, rivets and screws have to be routed on production robots. Since these hoses cannot cope with a small bend radius, the new triflex® RSE relies on very simple linear retraction system without deflection and no loops.
To the shop
TRE.60-100

Linear movement without deflection or loops on the robot.

The purpose of the triflex® RSE retraction system is to hold the e-chain® to the robotic arm as closely as possible - this prevents the e-chain® from intefering with the robot's movements. The triflex® RSE is a particularly lightweight and cost-effective retraction system
 

  • Available for triflex® sizes 40–125
  • Shorter cable lengths, because there is no deflection
  • Space-saving design
  • Fewer deflection points, higher process reliability also for LLK and supply hoses

Typical application areas: Industrial robots with complex motion sequences, for laser light cables (LLCs), corrugated tubes, and supply hoses

The RSE retraction system consists of the following components:

1

drylin® linear guide with carriage

2

Elastic cord or tension spring for retraction

3

Mounting plates for flexible connection to a wide range of robot types

4

Mounting bracket without strain relief of the corresponding e-chain® size

5

Smooth feed-through of the corresponding e-chain® size

TRE.60100

The easiest and fastest way to the right retraction system

Robot equipment configurator

  • Almost all robot types from Kuka, Fanuc, ABB and Yaskawa available for selection
  • A complete package configured with just a few clicks
  • Parts lists online
  • Always adaptable
  • Can be ordered online
go to the configurator

triflex® RSE product range – linear retraction system

Part no. e-chain series that goes with it triflex® R
variants
Price
ready for shipping in 72 hours from stock Germany TR.RSE.40 TRC.40.058.0 | TRE.40.058.0.B TRE, TRC 1,614.36 NZD Add to shopping cart
ready for shipping in 72 hours from stock Germany TR.RSE.50 TRC.50.080.0 | TRE.50.080.0.B TRE, TRC 1,779.02 NZD Add to shopping cart
ready for shipping in 72 hours from stock Germany TR.RSEC.60 TRE.60.087.0.B | TRC.60.087.0 TRE, TRC 1,904.11 NZD Add to shopping cart
ready for shipping in 72 hours from stock Germany TR.RSEC.65 TRCF.65.100.0 TRCF 1,982.11 NZD Add to shopping cart
ready for shipping in 72 hours from stock Germany TR.RSE.60 TRE.60.087.0.B | TRC.60.087.0 TRE, TRC 3,691.88 NZD Add to shopping cart
ready for shipping in 72 hours from stock Germany TR.RSE.65 TRCF.65.100.0 | TRCF.65.200.0 TRE, TRC 3,760.45 NZD Add to shopping cart
ready for shipping in 72 hours from stock Germany TR.RSE.70 TRE.70.110.0.B | TRC.70.110.0 TRE, TRC 3,706.40 NZD Add to shopping cart
ready for shipping in 72 hours from stock Germany TR.RSE.85 TRE.85.135.0.B | TRC.85.135.0 | TRCF.85.135.0 TRE, TRC, TRCF 3,767.16 NZD Add to shopping cart
ready for shipping in 72 hours from stock Germany TR.RSE.85.240 TRCF.85.240.0 TRCF 3,788.91 NZD Add to shopping cart
ready for shipping in 72 hours from stock Germany TR.RSE.100 TRE.100.145.0.B | TRE.100.145.0.C | TRC.100.145.0 | TRCF.100.145.0 TRE, TRC, TRCF 4,084.33 NZD Add to shopping cart
More about selected part:
3D-CAD 3D-CAD
Sample request Sample request
Quote request Quote request
myCatalog myCatalog

triflex® TRC and TRCF e-chain® product range for the RSE system:

Please note that the length of the e-chain® in the RSE retraction system should be at least 800mm.


Part no. Bi1
in mm
Bi2
in mm
BA
in mm
R
in mm
d1
in mm
d2
in mm
Pitch
in mm
Price
per chain link
ready for shipping in 24-48 hours from stock Germany TRC.60.087.0 22.5 19.5 65 87 20.5 17.5 20.4 7.89 NZD Add to shopping cart
ready for shipping in 24-48 hours from stock Germany TRC.70.110.0 28 24 81 110 26 22 25.6 12.04 NZD Add to shopping cart
ready for shipping in 24-48 hours from stock Germany TRC.85.135.0 33 28 94.5 135 31 26 30.6 15.13 NZD Add to shopping cart
ready for shipping in 24-48 hours from stock Germany TRC.100.145.0 37.5 32.5 108 145 35.5 30.5 34.5 18.47 NZD Add to shopping cart
ready for shipping in 24-48 hours from stock Germany TRC.125.182.0 43.3 43.3 135 182 41 41 44.1 30.04 NZD Add to shopping cart
ready for shipping in 24-48 hours from stock Germany TRCF.65.100.0 22.3 0 70.2 100 20 0 23.1 13.61 NZD Add to shopping cart
ready for shipping in 24-48 hours from stock Germany TRCF.65.200.0 22.3 0 70.2 200 20 0 23.1 15.35 NZD Add to shopping cart
ready for shipping in 24-48 hours from stock Germany TRCF.85.135.0 30 0 94.5 135 28 0 30.6 19.68 NZD Add to shopping cart
ready for shipping in 24-48 hours from stock Germany TRCF.85.240.0 30 0 94.5 240 28 0 30.6 19.68 NZD Add to shopping cart
TRCF.100.145.0 34.3 0 108 145 32 0 34.5 24.13 NZD Add to shopping cart
More about selected part:
3D-CAD 3D-CAD
Sample request Sample request
PDF PDF
Quote request Quote request
myCatalog myCatalog

triflex® TRE e-chain® product range for the RSE system:

Please note that the length of the e-chain® in the RSE retraction system should be at least 800mm.


Part no. Bi1
in mm
Bi2
in mm
BA
in mm
R
in mm
d1
in mm
d2
in mm
Pitch
in mm
Price
ready for shipping in 24-48 hours from stock Germany TRE.60.087.0.B 22.5 19.5 65 87 20.5 17.5 20.4 8.51 NZD Add to shopping cart
ready for shipping in 24-48 hours from stock Germany TRE.60.087.0 22.5 19.5 65 87 20.5 17.5 20.4 8.51 NZD Add to shopping cart
ready for shipping in 24-48 hours from stock Germany TRE.70.110.0.B 28 24 81 110 26 22 25.6 12.96 NZD Add to shopping cart
ready for shipping in 24-48 hours from stock Germany TRE.70.110.0 28 24 81 110 26 22 25.6 12.96 NZD Add to shopping cart
ready for shipping in 24-48 hours from stock Germany TRE.85.135.0.B 33 28 94.5 135 31 26 30.6 16.37 NZD Add to shopping cart
ready for shipping in 24-48 hours from stock Germany TRE.85.135.0 33 28 94.5 135 31 26 30.6 16.37 NZD Add to shopping cart
ready for shipping in 24-48 hours from stock Germany TRE.100.145.0.B 37.5 32.5 108 145 35.5 30.5 34.5 19.96 NZD Add to shopping cart
ready for shipping in 24-48 hours from stock Germany TRE.100.145.0.C 37.5 32.5 108 145 35.5 30.5 34.5 23.48 NZD Add to shopping cart
ready for shipping in 24-48 hours from stock Germany TRE.100.145.0 37.5 32.5 108 145 35.5 30.5 34.5 19.96 NZD Add to shopping cart
ready for shipping in 24-48 hours from stock Germany TRE.125.182.0 43.3 43.3 135 182 43 43 44.1 32.43 NZD Add to shopping cart
More about selected part:
3D-CAD 3D-CAD
Sample request Sample request
Quote request Quote request
myCatalog myCatalog
RSE with numbers

Calculating the overall chain length | RSE e-chains®

ø
index
R [mm]Dim. 2
[mm]
30.--
40.058390
50.080390
60.087750
65100750
70.110750
85.135750
85.
(R 240)
240750
100.145750
125.182750


Total chain length calculation: Dimension 1 + 2 + 3 
You can determine Dimensions 1 and 3 yourself according to your application or robot type.

Complete your application with the right accessories

Protectors provide additional protection from wear

Clip protector

Clip protector

Bolted protector

Clip protector with screw connection

triflex® R lip protector

Part No. Width index Outer diameter Width
ready for shipping in 24-48 hours from stock Germany TR.40.30 40 55 27 56.68 NZD Add to shopping cart
ready for shipping in 48 hours from stock Germany TR.50.30 40 69 34 58.07 NZD Add to shopping cart
ready for shipping in 48 hours from stock Germany TR.60.30 60 80 40 59.19 NZD Add to shopping cart
ready for shipping in 48 hours from stock Germany TR.65.30 60 88 44 74.14 NZD Add to shopping cart
ready for shipping in 72 hours from stock Germany TR.70.30 70 102 50 92.08 NZD Add to shopping cart
ready for shipping in 48 hours from stock Germany TR.85.30 85 118 59 96.35 NZD Add to shopping cart
ready for shipping in 48 hours from stock Germany TR.100.30 100 133 67 97.58 NZD Add to shopping cart
More about selected part:
3D-CAD 3D-CAD
Sample request Sample request
Quote request Quote request
myCatalog myCatalog

triflex® R clip protector with screw connection

Part No. Width index Outer diameter Width
ready for shipping in 72 hours from stock Germany TR.40.10 40 55 27 47.21 NZD Add to shopping cart
ready for shipping in 48 hours from stock Germany TR.50.10 50 69 34 151.02 NZD Add to shopping cart
ready for shipping in 48 hours from stock Germany TR.60.10 60 80 40 49.35 NZD Add to shopping cart
ready for shipping in 48 hours from stock Germany TR.65.10 65 88 44 167.57 NZD Add to shopping cart
ready for shipping in 24-48 hours from stock Germany TR.70.10 70 102 50 76.70 NZD Add to shopping cart
ready for shipping in 72 hours from stock Germany TR.85.10 85 118 59 80.88 NZD Add to shopping cart
ready for shipping in 48 hours from stock Germany TR.85.240.10 85 120 63 331.03 NZD Add to shopping cart
ready for shipping in 72 hours from stock Germany TR.100.10 100 133 67 81.37 NZD Add to shopping cart
ready for shipping in 72 hours from stock Germany TR.125.10 125 170 82 915.02 NZD Add to shopping cart
More about selected part:
3D-CAD 3D-CAD
Sample request Sample request
Quote request Quote request
myCatalog myCatalog

ready for shipping in 24-48 hours from stock Germany
ready for shipping in 48 hours from stock Germany
ready for shipping in 72 hours from stock Germany

The terms "igus", "Apiro", "chainflex", "CFRIP", "conprotect", "CTD", "drylin", "dry-tech", "dryspin", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-skin", "e-spool", "flizz", "ibow", "igear", "iglidur", "igubal", "igutex", "kineKIT", "manus", "motion plastics", "pikchain", "readychain", "readycable", "ReBeL", "speedigus", "triflex", "robolink", "xirodur", and "xiros" are legally protected trademarks of the igus® GmbH/ Cologne in the Federal Republic of Germany and where applicable in some foreign countries.

igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM,Parker, Bosch Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mention on this website. The products offered by igus® are those of igus® GmbH