My contact person
Select location
Bar stock - iglidur®

Wear problems are solved quickly and cost-effectively with a large selection of bar stock products from igus®. They are long-lasting and their shape can be adapted individually. Plastic bar stock products made of iglidur® material do not need any additional lubrication and are maintenance-free. They have been specially developed for dynamic applications, have low coefficients of friction and are very hard-wearing. This substantially lengthens the service life of your application. iglidur® bar stock products are available as round rods, tubes or plates of different lengths. Upon request, they can be machined if special shapes are needed. Depending on the application, different iglidur® materials with specific properties can be selected. For example, there are iglidur® plastic bar stock products that withstand temperatures up to +250 °C or have been certified for food and drinking-water applications.

Filter

Requirements

Due to order peaks, the delivery time for single items is 10-15 working days longer than stated. Please refer to our order confirmation for the specific delivery date. For urgent, short-term requirements, please contact us personally so that we can realise the delivery time necessary for you. You will find your contact person at the top of the menu under "My contact person", next to the language/country selection, or on this page.

Number of products: 49

iglidur® A350, round bar
  • For use with temperatures up to +180°C
  • Comply with FDA requirements
  • For medium to high loads
  • Equally good for both rotating and pivoting applications
  • Lubrication-free and maintenance-free
  •  Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
     

38.02 USD/m

2 ready for shipping in 24 - 48 hours
10 ready for shipping in 48 - 72 hours
To the product page
iglidur® J, round bar
  • Low wear against a lot of shaft materials
  • Low coefficients of friction during dry operation
  • Vibration dampening
  • Good resistance to chemicals
  • Best performance with soft shaft materials
  • Low moisture absorption

10.30 USD/m

4 ready for shipping in 24 - 48 hours
5 ready for shipping in 48 - 72 hours
To the product page
iglidur® X, round bar
  • Continuous operating temperatures from -100 to +250 °C
  • Extremely high chemical resistance
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • High compressive strength

82.19 USD/m

12 ready for shipping in 48 - 72 hours
To the product page
iglidur® A180, round bar
  • Complies with food and drug administration (FDA) regulations for repeated contact with food
  • Good media resistance
  • For wet environments
  • High wear resistance

9.91 USD/m

11 ready for shipping in 48 - 72 hours
To the product page
iglidur® A350, bar stock plates
  • For use with temperatures up to +180°C
  • Comply with FDA requirements
  • For medium to high loads
  • Equally good for both rotating and pivoting applications
  • Lubrication-free and maintenance-free
  •  Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
     

461.10 USD/Pc.

12 ready for shipping in 48 - 72 hours
To the product page
iglidur® J, bar stock plates
  • Low wear with different shaft materials
  • Low coefficient of friction during dry operation
  • Vibration-dampening
  • Good chemical resistance
  • For best performance with soft shaft materials
  • Low moisture absorption

35.60 USD/Pc.

31 ready for shipping in 48 - 72 hours
To the product page
iglidur® A160, round bar
  • Compliant with EC regulation 10/2011 EC, FDA-compliant
  • High media resistance
  • Lubrication and maintenance-free

36.00 USD/m

9 ready for shipping in 48 - 72 hours
To the product page
iglidur® A181, round bar
  • For use with temperatures up to +90 °C
  • The food grade material, FDA and EC regulation 10/2011 EC compliant
  • Good media resistance

20.08 USD/m

8 ready for shipping in 48 - 72 hours
To the product page
iglidur® H1, round bar
  • High wear resistance in extreme ambient conditions
  • Very low coefficients of friction
  • High resistance to temperature and chemicals
  • For underbonnet applications
  • Lubrication and maintenance-free

91.88 USD/m

7 ready for shipping in 48 - 72 hours
To the product page
iglidur® J2, round bar
  • Good mechanical properties, robust
  • Cost-effective
  • Good media resistance
  • Lubrication and maintenance-free

146.97 USD/m

1 ready for shipping in 48 - 72 hours
To the product page
iglidur® J3, round bar
  • Specialist for pivoting and pulsating loads
  • Good media resistance
  • Low moisture absorption
  • PTFE-free

18.68 USD/m

9 ready for shipping in 48 - 72 hours
To the product page
iglidur® J4, round bar
  • Lubrication and maintenance-free
  • Low-cost material for mass production
  • Low coefficients of friction
  • Good media resistance
  • Low moisture absorption

22.00 USD/m

14 ready for shipping in 48 - 72 hours
To the product page
iglidur® J200, round bar
  • Very long service life with hard anodised aluminium
  • Low coefficients of friction
  • Low wear
  • For low to medium loads
  • Lubrication and maintenance-free

Upon request

3 ready for shipping in 48 - 72 hours
To the product page
iglidur® J260, round bar
  • Very good coefficient of friction for low or medium loads
  • Good media resistance
  • Long service life – even on polymer shafts and in other special cases
  • Lubrication and maintenance-free

83.07 USD/m

2 ready for shipping in 48 - 72 hours
To the product page
iglidur® J350, round bar
  • Excellent coefficient of friction against steel
  • Continuous service temperature up to +180 °C
  • For medium to high loads
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Particularly well-suited to rotating movements

54.71 USD/m

13 ready for shipping in 48 - 72 hours
To the product page