My contact person
Select location

Bar stock for motion

The round rods made of of the iglidur® range of bar stock can be ordered in individual lengths from 100 mm to 1000 mm and with a diameter of 10 mm to 100 mm. We offer different materials to meet the different requirements of each application. Here, you can find the right round-rod material - whether for low, medium or high speeds, for temperatures up to 250 °C or for mainly stationary or extreme loads, in other words for almost every requirement.
Like every igus® product, the round rods are also suitable for absolutely lubrication-free use and are therefore not only maintenance-free but are also especially hygienic.
For example, iglidur® round rods are used in the area of medical technology and in the food and packaging industry.

Categories
Filter
Core Requirements
Requirements
Material

Due to order peaks, the delivery time for single items is 10-15 working days longer than stated. Please refer to our order confirmation for the specific delivery date. For urgent, short-term requirements, please contact us personally so that we can realise the delivery time necessary for you. You will find your contact person at the top of the menu under "My contact person", next to the language/country selection, or on this page.

Number of products: 29

iglidur® A350, round bar

  • For use with temperatures up to +180°C
  • Comply with FDA requirements
  • For medium to high loads
  • Equally good for both rotating and pivoting applications
  • Lubrication-free and maintenance-free
  •  Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
     
38.02 USD/m
2 ready for shipping in 24 - 48 hours
10 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® J, round bar

  • Low wear against a lot of shaft materials
  • Low coefficients of friction during dry operation
  • Vibration dampening
  • Good resistance to chemicals
  • Best performance with soft shaft materials
  • Low moisture absorption
10.30 USD/m
2 ready for shipping in 24 - 48 hours
7 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® X, round bar

  • Continuous operating temperatures from -100 to +250 °C
  • Extremely high chemical resistance
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • High compressive strength
82.19 USD/m
12 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® A180, round bar

  • Complies with food and drug administration (FDA) regulations for repeated contact with food
  • Good media resistance
  • For wet environments
  • High wear resistance
9.91 USD/m
11 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® A160, round bar

  • Compliant with EC regulation 10/2011 EC, FDA-compliant
  • High media resistance
  • Lubrication and maintenance-free
36.00 USD/m
9 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® A181, round bar

  • For use with temperatures up to +90 °C
  • The food grade material, FDA and EC regulation 10/2011 EC compliant
  • Good media resistance
20.08 USD/m
8 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® H1, round bar

  • High wear resistance in extreme ambient conditions
  • Very low coefficients of friction
  • High resistance to temperature and chemicals
  • For underbonnet applications
  • Lubrication and maintenance-free
91.88 USD/m
7 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® J2, round bar

  • Good mechanical properties, robust
  • Cost-effective
  • Good media resistance
  • Lubrication and maintenance-free
84.15 USD/m
1 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® J3, round bar

  • Specialist for pivoting and pulsating loads
  • Good media resistance
  • Low moisture absorption
  • PTFE-free
18.68 USD/m
9 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® J4, round bar

  • Lubrication and maintenance-free
  • Low-cost material for mass production
  • Low coefficients of friction
  • Good media resistance
  • Low moisture absorption
22.00 USD/m
14 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® J200, round bar

  • Very long service life with hard anodised aluminium
  • Low coefficients of friction
  • Low wear
  • For low to medium loads
  • Lubrication and maintenance-free
Upon request
3 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® J260, round bar

  • Very good coefficient of friction for low or medium loads
  • Good media resistance
  • Long service life – even on polymer shafts and in other special cases
  • Lubrication and maintenance-free
83.07 USD/m
2 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® J350, round bar

  • Excellent coefficient of friction against steel
  • Continuous service temperature up to +180 °C
  • For medium to high loads
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Particularly well-suited to rotating movements
54.71 USD/m
13 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® M250, round bar

  • Excellent vibration dampening
  • Resistant to edge loads
  • High impact resistance
28.82 USD/m
6 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® P210, round bar

  • Low moisture absorption
  • Good coefficients of friction and wear on almost every shaft
  • Good price/performance ratio
80.23 USD/m
10 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)