The E4/4 system is used in two areas: for extremely long travels and unsupported, side-mounted applications. This is made possible by the famous "undercut" design between the two chain links. Compressive strength and rigidity are increased, which provides for greater resistance to wet and rough weather conditions. Special roller chain links make E4/4 into a true specialist for long travel distances. The undercut design also allows excellent ESD performance. The chain links always fit tightly together; only when there is good contact between them it is possible for electricity to flow (please note: this only applies to the special conductive material igumid ESD and does not apply to the standard series included in this catalogue).
Inner height hi: 32mm
Inner widths Bi: 50 - 400mm
Bend radii R: 63 - 300mm
Pitch: 56mm
Inner height hi: 42mm
Inner widths Bi: 50 - 400mm
Bend radii R: 75 - 350mm
Pitch: 67mm
Inner height hi: 56mm
Inner widths Bi: 50 - 600mm
Bend radii R: 135 - 500mm
Pitch: 91mm
Inner height hi: 80mm
Inner widths Bi: 50 - 600mm
Bend radii R: 150 - 1000mm
Pitch: 91mm
Inner height hi: 32mm
Inner widths Bi: 50 - 400mm
Bend radii R: 63 - 300mm
Pitch: 56mm
Inner height hi: 42mm
Inner widths Bi: 50 - 400mm
Bend radii R: 75 - 350mm
Pitch: 67mm
Inner height hi: 56mm
Inner widths Bi: 50 - 600mm
Bend radii R: 135 - 500mm
Pitch: 91mm
Inner height hi: 80mm
Inner widths Bi: 50 - 600mm
Bend radii R: 150 - 1000mm
Pitch: 91mm
Inner height hi: 56mm
Inner widths Bi: 50 - 600mm
Bend radii R: 135 - 400mm
Pitch: 91mm
Inner height hi: 80mm
Inner widths Bi: 50 - 600mm
Bend radii R: 150 - 500mm
Pitch: 91mm
Inner height hi: 56mm
Inner widths Bi: 75 - 462mm
Bend radii R: 135 - 400mm
Pitch: 91mm
Inner height hi: 80mm
Inner widths Bi: 75 - 462mm
Bend radii R: 150 - 500mm
Pitch: 91mm
Inner height hi: 32mm
Inner widths Bi: 50 - 300mm
Bend radii R: 100 - 300mm
Pitch: 56mm
Inner height hi: 42mm
Inner widths Bi: 50 - 300mm
Bend radii R: 125 - 350mm
Pitch: 67mm
Inner height hi: 56mm
Inner widths Bi: 75 - 462mm
Bend radii R: 150 - 500mm
Pitch: 91mm
Inner height hi: 80mm
Inner widths Bi: 75 - 462mm
Bend radii R: 200 - 1000mm
Pitch: 91mm
Specific parameters and a comparison table helps you find the right energy chain quickly.
Joining, separating and opening the energy chains and energy tubes.
System E4/4 is used in various applications.
ESD: Excellently suitable with special material igumid ESD (upon request).
System E4/4 tried and tested for very long travels
"Side-mounted" possible without support