My contact person
Select location

Products

Filter

Core Requirements
Size
Requirements
Material

Number of products: 16

iglidur® Q2E, sleeve bearing, mm
  • Service life in high load swing applications beyond 130 MPa
  • Optimised, efficient design for even better absorption of edge loads
  • Lubrication-free
  • Wear-resistant
  • Dimensionally stable
  • Corrosion-resistant
iglidur® H1, knife edge roller
  • Low drive power
  • Endurance runner with high media resistance
  • Tight deflection radii
  • High wear resistance in extreme ambient conditions
  • Long service life of the belt
  • Very low coefficient of friction
  • High resistance to temperature and chemicals
from 8.59 USD/Pc.
To the product page
iglidur® A180, knife edge roller
  • Completely lubrication-free belt guiding
  • The FDA-compliant all-rounder
  • Low drive power
  • Tight deflection radii
  • Long service life of the belt
  • The iglidur® A180 material complies with food and drug administration (FDA) regulations for repeated contact with food
  • Good media-resistance
  • Long service life
  • For wet environments
iglidur® A350, knife edge roller
  • Belt deflection 100% lubrication-free
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Low drive power
  • The endurance runner at higher temperatures in the food sector
  • Tight deflection radii
  • Compliant with EC regulation 10/2011 EC
  • Long service life of the belt
  • FDA compliant
  • Long service life
  • For use with temperatures up to +180 °C
from 5.61 USD/Pc.
To the product page
iglidur® JVSM, clearance-free prestressed bearing, mm
  • Standard product range from stock
  • radially and axially pre-tensioned plain bearings
  • Completely free of clearance in unloaded state
  • Material: iglidur® J
  • Maintenance-free and calculable service life
from 1.32 USD/Pc.
To the product page
iglidur® A500, Polysorb disc spring
  • iglidur® A500: High temperature material
  • Compensation for axial clearance and manufacturing tolerances
  • Lightweight
from 3.85 USD/Pc.
To the product page
iglidur® J, Polysorb disc spring
  • iglidur® J: standard material for many applications
  • Compensation for axial clearance and manufacturing tolerances
  • Vibration dampening
from 2.05 USD/Pc.
To the product page
iglidur® polymer bearing with lip seal
  • Polymer bushing with clip-on radial shaft seal
  • Seals against the shaft
  • Can be manufactured with different types of seal
  • High-temperature version available
  • Sealing ring made of fluoroelastomer
from 6.26 USD/Pc.
To the product page
iglidur® M250 double flange bearings, MKM
  • press fit
  • Both sides axially mounted
  • Tolerance compensation of the sheet thickness
  • Easy installation
  • Axially prestressed
  • Special option possible
from 3.44 USD/Pc.
To the product page
iglidur® P210, knife edge roller
  • Low drive power
  • Tight deflection radii
  • Long service life of the belt
  • Long service life
  • Belt deflection 100% lubrication-free
  • Standard range from stock
iglidur® VATM, axial bearing
  • Maintenance-free plain bearing system
  • For high service performances
  • High stiffening
  • Simple installation
  • High temperature version
iglidur® A250, knife edge roller
  • Wear-resistant
  • FDA and EU10/2011-compliant
  • Low required drive power
  • Lubrication-free belt deflection
from 6.61 USD/Pc.
To the product page
iglidur® PEP, multi-component bearing, mm
  • Can be used with any shaft material
  • Cost-effective
  • Easy installation
  • Low coefficients of friction
from 2.99 USD/Pc.
To the product page
iglidur® JVFM, clearance-free prestressed bearing with flange, mm
  • Standard product range from stock
  • radially and axially pre-tensioned plain bearings
  • Completely free of clearance in unloaded state
  • Material: iglidur® J
  • Maintenance-free and calculable service life
from 1.72 USD/Pc.
To the product page
iglidur® B180, gear, mm
  • Very low coefficients of friction
  • Wear-resistant material for continuous operation
  • Vibration damping
  • Highest service life in the area of iglidur® gears