The product finder enables you to get a quick overview of all energy chains®.
You'll get an overview of the appropriate energy chains® as soon as you answer just two queries. If you like, you can also optimize the result with further specifications.
You can compare the technical data of two or more e-chains® with each other. If you are not sure which is the most suitable energy chain, simply click to send us your enquiry.
Cost-effective, one-piece energy chains®, quickly fillable from inside or outside
Modular, one-piece band for simple applications. Cost-effective solution for large numbers
Opening and closing of small and medium e-chains® and e-tubes at lightening speed.
Quickly mount cable packets in bundles. Low-priced alternative to complex cable shears.
One-piece - Smallest sizes, 5 to 15 mm inner heights, small pitch, silent operation. Light weight and cable-friendly e-chains® interior.
One- and two-piece energy chains®, 18 to 41 mm inner heights, small pitch, silent operation. Optimized weight/stability ratio. Manifold interior separation
Standard e-chain®, medium sizes, 21 to 45 mm inner heights. Snap-open along two sides, lightning fast installation. Many-sided modular interior separations
Swivelable one side, medium sizes. Many-sided, modular interior separations. Easy snap-open inside or outside.
Removable lid, medium sizes. Many-sided, modular interior separations
Lids snap open along outer radius from both sides.
Novel design: Rounded contours, large filling space, "RBR" version with bending radius on both sides also available.
For long service life, high stability, assembly compatibility and modularity "Save away" many new costly additional components with the E4.1 e-chain system®. E4.1 - the standard for nearly all applications
Almost all applications are possible with this e-chain®. Inner heights 21 to 80 mm. e-chain® and tubes snap-open along two sides. Quick installation, cable-friendly design.
High stability and easy access due to snap-open crossbars. Inner heights 38 to 48 mm. Low weight facilitates higher dynamics.
Huge, modular kit. Inner heights from 21 to 204 mm. e-chain® and tubes snap-open along two sides. Many accessories, vast application area.
energy chains® and tubes, snap-open along two sides. Inner heights from 32 to 80 mm. Especially suitable for "side-mounted" applications and travel distances over 200 m.
energy chains® and tubes, snap-open along two sides. Inner heights from 56 to 112 mm. Light and cost effective
Extremely low noise operation up to 33 dB(A). Inner height 29mm Low-vibration, very light. For highly dynamic applications; suitable for cleanrooms.
Extremely low noise operation up to 38 dB(A). Inner heights from 10 to 15 mm. Low-vibration, wear-resistant. For highly dynamic applications; suitable for cleanrooms.
Extremely quiet operation up to 46 dB(A). Low-vibration, high velo
cities/accelerations, wear-resistant; suitable for cleanroom. Snap-open along both sides, also as e-tube.
Series E6.1 combines all benefits of Series E6, such as its ruggedness and cleanroom-compatibility, at lower weight and even quieter operation and higher maximum speeds.
Three energy chain® options: enclosed, easily fillable, or as light version. First choice for multi-axis industrial robots.
Closed or easily fillable. Modular system for complex movement. Chain links moving in a combination of one, two or three axes possible.
Enclosed or easily fillable. Modular system for complex movement. Chain links moving in a combination of one, two or three axes possible.
New generation energy chains® for circular movements up to 540° and more. Higher stability and more additional load possible.
energy chains® for circular movements up to 540°. Quick cable replacement. Modular design - variable widths.
twisterband: new sizes. Rotary movements up to 7000° and more. Compact, modular and cost-effective.
TwisterBand HD: Stable pin/hook connection for high load and long service life
Long travels and extreme travel speed at cable loads of up to 50 kg/m. Available as energy chain® with crossbars at every link or as enclosed e-tube.
Quiet, abrasion-resistant, maintenance-free energy chain®. For long travels of 600 m and more, very high fill weights and speeds.
Combination of autoglide and energy chains®. easy chain®, E2/000 and E4.1 systems.
Exterior stop dogs prevent the accumulation of dust. All existing widths can be combined.
Chemically-resistant and corrosion-resistant plastic guide trough system
Cost-effective and fully enclosed complete solution, e.g. waste water treatment plants.
Compact, cost-saving energy chain®. Compact, complete system for the safe guidance of energy, data and air.
Unhindered travel: Chips cannot stick between the gliding surfaces of the lower and upper runs of the energy chain®.
Safe vertical guidance for e-chains® in high-speed rack feeders.
guidefast guide troughs are mounted on the side. Simple installation through a small number of different components.
Snap-open energy chains® with mounting brackets and interior separation in ESD and ATEX version available from stock.
The c-chain enables a continuously revolving energy supply system made of standardized modular components.
The alternative to the cable drum - cable-friendly and guides various media safely
Magnetic magsnap opening crossbars – save space run without trough
Alternative to Zig-Zag solution - Lighter and smaller installation space
Heavy-Duty underwater energy supply
igus® e-rover extension for E-RTGs
Simple tool – great benefits: assembly tools for ‘frequent users’
Older energy chains® are also available on a continuing basis. For new constructions, we recommend the corresponding new identical e-chains®.
The igus® e-skin is a snap-open tube, which is composed of two parts.
The reinforcement for existing corrugated tube systems - e-rib
To protect flexible electric cables.
Secure and flexible guiding of the smallest hoses < Ø 1 mm
Inner height hi: 24 mm
Inner width Bi: 38 - 103 mm
Bend radii R: 150 - 250 mm
Pitch: 27.8 mm
From the light and all-purpose "Super-Alu guide trough" up to the simple and cost-effective insert trough.
Integrated strain relief and cable guides within guide trough.
Maximum angle of rotation 600°
Strain relief clamps, tie wrap plates and modular snap-on strain reliefs.
Special cables for energy chains® - tested, tested, tested.
Over 950 cables from stock in 24 h or today. No minimum quantity surcharges, no cutting costs.
igus® e-chain system® is like the umbilical cord of modern machines. energy chains® and drag chains take care of the supply of energy, data and signals and for this reason are continuously in motion. We offer you all components - e-chains®, special cables, plug connections, all accessories - individually or as complete system. For that, igus® has the largest selection worldwide with over 100,000 products from stock. We take responsibility for the operation.
Our energy chain® catalog offers you the possibility to assemble a chain including interior separation with cable at few mouse clicks. The product overview and several selection aids are available for you to select the suitable energy chain®.
igus® contact E-Mail Automation Equipment Ltd.
myigus myCatalogMore than 100.000 products in stock at igus®. igus® shipping and order processing from 7AM to 8PM (Mon-Fri), 8AM-12PM (Sat)!
Newsletter Registration Terms and Conditions Imprint General Information Data Privacy Protection Declaration