My contact person
Select location

iglidur® J350, plate bar stock

  • Excellent coefficient of friction against steel
  • Continuous service temperature up to +180 °C
  • For medium to high loads
  • Particularly well-suited to rotating movements
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors

Unsure whether it fits?

Product description
iglidur® bar stock J350
 
iglidur® J350 blends universally good wear resistance, flexibility and temperature resistance into a very versatile iglidur® material with a broad application spectrum.
Lubrication-free iglidur® bar stock enables you to freely design maintenance-free sliding elements and bearings of all kinds. The variety of iglidur® bearing materials guarantees the optimum bearing material with the best friction and wear values to the mating partner.
In addition to the bar stock for independent processing, we will also be happy to produce plain bearings, sliding elements and slide pads in all shapes and sizes. We can even provide urgent prototypes in a matter of days in line with an agreed deadline.
 
Material properties
 
  • Excellent coefficient of friction against steel
  • Continuous operating temperature of up to +180°C
  • For medium to high loads
  • Particularly well suited to rotational movement
Typical application areas
When to use it?
  • When a wear-resistant bearing for rotational movement with medium and high loads is required 
  • When a cost-effective bearing is required for use at high temperatures
  • When press-fit up to +150°C is necessary 
  • When high wear resistance is required at high loads
  • When the bearing is exposed to shocks and impacts
When not to use?
  • If permanent temperatures exceed +180°C iglidur® X
  • If low friction is required iglidur® J
  • When a cost-effective bearing with low friction is needed iglidur® D or iglidur® R
  • With high rotational speeds iglidur® J
Use our filter options to find the suitable product
Certificates and standards
RoHS compliant
According to 2011/65/EU (RoHS 2)
Technical data