iglidur® G1, sleeve bearing, mm - G1SM

iglidur® G1 | The new lubrication-free standard
With iglidur® G1 we offer a wear-resistant and versatile material for a wide range of applications. Recommended for applications with medium to high loads at medium speeds. Even at elevated temperatures up to 180°C, iglidur® G1 is dimensionally stable, wear-resistant and offers very low moisture absorption. Thus iglidur® G1 is suitable for a multitude of different applications and represents an all-rounder with very good running performance.

Typical applications

Automotive
Machine tools
Furniture/Industrial design

Fitness and sports

Find more applications here:
Industry solutions
 

When to use it? When an economical all-round performance bearing is required For low to average surface speeds When the bearing needs to run on different shaft materials For pivoting and rotational movements

When not to use it? When mechanical rework is required iglidur® M250, sleeve bearing, mm When the highest wear resistance is required iglidur® W300, sleeve bearing, mm When universal chemical resistance is required iglidur® X, sleeve bearing, mm When temperatures are continuously greater than +180°C iglidur® H, sleeve bearing, mm iglidur® X, sleeve bearing, mm iglidur® H370, sleeve bearing, mm When used under water iglidur® H370, sleeve bearing, mm

Use our filter options to find the suitable product


Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® plain bearings depend on the material and wall thickness. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be installed with a smaller bearing clearance. The rule for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Testing methods

Assembly
iglidur® plain bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing bore. The press-fit excess dimension can be up to 2% of the inner diameter. This ensures the secure press-fitting of the bearings. Axial or radial movements in the housing are therefore avoided.
iglidur® - assembling, gluing, machining