1. Large pins - long service life2. Torsional movements possible3. Version E, to be filled along outer radius4. Version Z, to be filled along inner radius5. Cable-friendly interior6. Mounting bracket with integrated strain relief option7. Dirt-repellent outer contours8. Very easy to fill - Cables are simply pressed in9. Patented "pushbutton design" holds links together
10. Available with 1 or 2-chamber system
(permanently injection-moulded multiple chamber system
for cable separation
Available Inner widths:2x37,2x50 mmAvailable bending radii R: 55 to 200 mmPitch: 46 mm / link = 22 links/m
* The required clearance height is HF = H + 40 mm (with 2.5 kg/m fill weight), this should be taken into account for all application types.Please contact us if you have particularly confined space requirements.
** The calculated length corresponds to the chain length without mounting brackets.
Crossbars overlapping on the opening mechanism
A=Moving end, B=Fixed endPitch: 46 mmLinks / m: 22Travel: SChain length = S/2 + K
Unsupported length versus fill weightX axis: Unsupported length in m FLB/FLGY axis: Fill weight in kg/mLower scale: Travel S in mFLB = Unsupported with permissible sagFLG = Unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
2 mounting bracket variants
2 options and 5 bend radii
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Fixed interior separation
Polymer - pivoting
Polymer - locking
Data protection declaration