1. KMA - mounting brackets2. Fixed/pivoting mounting brackets available3. R98: Lid can be opened and removed4. R98: Shelves can be removed5. Tube and chain can be combined6. Strain relief elements can be integrated7. 50/51: Crossbars removable along both sides
Available inner widths: 75 to 462 mmAvailable bend radii: 200 to 1000 mmPitch: 91 mm/link = 11 links/m
For new designs, we recommend the improved e-chain® series R4.80 from the igus® E4.1 system.+25% more unsupported length, higher stability and tensile strength, same dimensions and connection dimensions
Series R98 is available from stock in limited numbers. Product support and storage are limited as of 2012.
For questions, please refer to your igus® contact person. Thank you for your understanding
to the R4.80 series
* The required clearance height is HF = H + 60mm (with 3kg/m fill weight), this should be taken into account for all application types.Please contact us if you have particularly confined space requirements.
** The calculated length corresponds to the chain length without mounting brackets.
A=Moving end, B=Fixed endPitch: 91 mm per linkChain links per m: 11Travel: SChain length = S/2 + K
Unsupported length versus fill weightX axis: Unsupported length in m FLB/FLGY axis: Fill weight in kg/mLower scale: Travel S in mFLB = Unsupported with permissible sagFLG = Unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Modular interior separation available
3 mounting bracket variants
Variable widths through extension links
10 widths and 10 bend radii
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Separators can be fitted anywhere in the e-chain® cross section. The standard separator Part no. 501 offers secure standing ability with its wide base, also for large cables/hoses.
With the various elements of the interior separation, the e-chains® and energy tubes can be divided both vertically and horizontally. Side plates and shelves allow a flexible separation structure. Shelves of various widths can be arranged in steps of 7 mm on 11 levels. You can find recommendations for assignment in the "Design" chapter. For installing the open slotted separators, the top and bottom slots cannot be used for shelves.
KMA - pivoting
KMA - locking
Steel guide troughs
1. Guide trough (blue)2. Glide bar (black)3. Installation set (red)4. Individual bracket without C-profile5. Profile rail length
+ Easy assembly using installation sets+ 2-part design - configurable from chain width+ Very stable+ cost-effective+ large selection
Guide trough without glide bars, Part No. 96.30, guide trough with glide bars Part No. 96.31
Installation sets, Part No. 96.50. XX
Data protection declaration